ZIBO RIKEN MT COATED ABRASIVES CO., LTD.
ZIBO RIKEN MT COATED ABRASIVES CO., LTD.
Keeping and Storing of Flap Wheels
Keeping and Storing of Flap Wheels

Keeping and Storing of Flap Wheels

In order to maintain the product performance of abrasives, the requirement of safety performance of grinding wheel products in use is relatively high. In the process of keeping or storing products, we need to pay more attention to sandpaper flap wheels. Let's get to know them together.


1. For sandpaper wheels, the storing environment must be kept dry and ventilated. It is not possible to place grinding wheels in wet or frozen positions. It is better not to contact acid-base or oil products.


2. When a variety of flap wheel products are stored together, they should be classified according to the shape, material and size of the products, so as to avoid confusion leading to the occurrence of missing, and do a good job in identifying them.


3. In the process of storing grinding wheels, some iron plates should be placed at the bottom and top. In this way, in the process of product storage, it can effectively avoid the phenomenon of product rupture or deformation, and the stacking height can not be too high.


4. If grinding wheel products need to be stored for a long time, they must be re-examined before they are used, and then they can be used only after they are qualified. Prevent changes in chemical composition from affecting product performance.


When flap wheel products are kept or stored, special attention must be paid to these matters. This can prevent the damage to the product during storage and maintain the good working performance of the product.